Home appliance repairs can sound complex and challenging, but the thought of a leaky dishwasher or a faulty freezer can be unsettling and financially distressing. Amid the pandemic and issues of increased expenses, it is understandable that you would be reluctant to have a technician in your home to repair your appliances.
With recent studies showing an uptick in DIY home remodeling projects, you want to check out these appliance repairs you can do yourself instead of picking up the phone and spending lots of cash on your appliance repairs:
- Worn-Out Stovetop
A worn-out stovetop can be cooking a nightmare, but replacing a thing or two can make all the difference. You can replace the coil surface components, the burner grates, and the burner drip bowls if you are using an electric stove. If you want to be economical, you can use a grate or cooktop cleaner to leave it sparkling once more. Since some chemical cleaners can smell harsh, you might want to consider natural cleaning products. For instance, a combination of baking soda, salt, and water can be an effective cleaner for your stovetop.
- Buildup in Dryer Lint
Statistics show that lint buildup inside dry cabinets causes more than 15,000 fires each year. This usually occurs when your exhaust vent or cap is blocked. Airflow is restricted, which forces dryer lint to escape through tiny holes along the drum edges and inside your cabinet. Dryer lint buildup is problematic as gas burners, and electric heating items can ignite or spark the motor and push flames through the lint-lined exhaust vent. Therefore, it is essential to frequently check your vent and your cabinet inside to prevent this from happening.
- Fridge Door Gasket Replacing
If your refrigerator opens on its own or allows in a draft, it may require a new gasket. It is vital to check if it isn’t dirty due to the accumulation of food bits and spills, preventing the gasket from creating a good seal. If you notice damages or cracks, you should consider replacing your gasket. While it shouldn’t be too much work to replace your damaged gasket, you want to make sure you have the right replacement for your specific model. However, it is best to read your refrigerator manual for more details.
- Chipped Porcelain
It can be distressing to see tiny chips and dings on your expensive porcelain appliances and fixtures. However, there is an effective solution, and it doesn’t have to cost you money. A little bit of sanding, buffing, and glaze touch-ups can vanish those ugly blemishes and make your porcelain appliances look new again. A standard touch-up porcelain glaze kit shouldn’t cost you more than $20. This is nothing compared to the feel of removing all the scratches, dings, and disguised chips you have on your porcelain sinks, bathtubs, toilets, and other major home appliances.
- Leaky Dishwasher
A leaky gasket is one of the common causes of dishwasher leaking. Finding pools of water on your kitchen floor is a sign of a leaking dishwasher door gasket. However, there are other ways you can identify if your dishwasher is leaky. First, you can open the dishwasher and look around the door seal. If the seal is worn-out or no longer ideal, you can get a model-specific gasket replacement and install it along the cavity’s edge.
Meanwhile, it is vital to note that other factors such as using incorrect detergent, cracked or faulty hose connections, and float switch problems can also cause leakage. So it can be helpful to check to know if you can DIY or need to call the technician.
- Broken Water Dispenser
This is a common problem in side-by-side refrigerators and can cost you $150 and $450 to repair. However, you can shelve this cost with standard hand tools and a new switch. You will require hand tools such as a screwdriver, drill bit set, putty knife, paint can opener, and cordless drill/driver. For the experienced DIYer, this shouldn’t be too much work as you can complete it in less than an hour. To do this:
- Unplug the refrigerator
- Remove the drip tray to see the trim panel screws. You can use the putty knife to unsnap if you don’t see any screws.
- Lift the trim panel off the door
- Proceed to remove the microswitch
- Take off the paddle retainer plate and install the new one.
However, replacing the switching retaining pegs with screws is essential if broken. You may want to disconnect the water tube first before undertaking any repair works.
- Gas Burners Won’t Light
Boil-overs from your cooking can leave your gas burner ignition ports clogged. This can cause weak or uneven flames. In some cases, your gas burner may not light at all, so you want to find ways to unclog your burner ignition ports. To do this, remove the burner head and clean the ports with a toothbrush. There are other reasons why your gas burner won’t light. Check to see if your gas range is plugged in and getting power. Likewise, check your gas valve since you could turn it off mistakenly.
- Faulty Ice Maker
You don’t have to call the servicing technician when your ice maker stops working. A few troubleshooting can help you identify the problem and address it appropriately. You can purchase a new ice maker replacement and install it with ease. All you need is a long screwdriver or nut driver to loosen the screws holding the ice maker. To troubleshoot your ice maker, ensure the bail wire on top of the ice tray is down, check your water supply, check the tap valve and solenoid. Make sure the tube filling the ice tray isn’t frozen. You can use the hair dryer to melt it if it’s frozen.
Spending on home improvement has unsurprisingly spiked in the last few months, with many Americans using the houses more and differently. While you can DIY these appliance repairs, some may require buying replacement parts. Fortunately, online appliance spare parts shops help with any parts you need from Samsung to LG, Haier, or a Westinghouse spare part if you need one.