You do not have to spend hundreds and thousands of dollars in getting new benchtops installed when you can make your own at home or in your garage. With a little effort and some supplies, you can make a durable and cheap benchtop. Concrete Crib is a company that provides benchtop solutions. It is just one option, there are several other stores available online, but if you want to do it yourself, this guide is the perfect start:
- Gather Supplies and Make a Plan
You will need a good mold in which you will pour in your concrete. Melamine coated particleboard can be considered as it is cheap as well as durable. Other supplies include concrete powder, wires, drills, etc.
- Build Your Form
Use whatever material you have chosen to make the form you will pour in your concrete mixture. The walls of the form will be according to the height you require of your benchtop.
- Seal the Form
Carefully seal all the edges so that no concrete drips out when the material is poured in.
- Prepare Inner Reinforcements
A reinforcement grid will be used inside, which gives concrete the support it needs. The more the mesh inside, the more strong the form becomes.
- Pour Concrete Mixture
Once the form is all prepared, it is time to pour in your concrete mixture. Concrete does set very fast, so it is important to pour in fast and settle it quickly.
- Tap the form to Remove Air Bubbles
Once the concrete is set to a certain extent, it is recommended to tap or vibrate the mold such that all the air bubbles are removed. If too much air is left in the mixture, it may crack.
- Remove Form
Once you are sure that the concrete mixture has settled, it is safe to remove the form. It is the tricky part, and often breakage happens at this point. You need to flip over the form to take the benchtop out.
- Clean the Form
Once the form has been removed, and the benchtop is extracted, sand it down. It will smooth the surface of the benchtop. After sanding, you can use alcohol to clean the surface thoroughly.
- Fill in Any Holes or Cracks
At this point, you might notice some cracks or holes. The holes can be due to any air pockets that were removed during the tapping phase. Use the same concrete mixture you had earlier mixed to fill in any gaps. Then leave it to dry off. Clean the top again for the final look.
Now you are all set to install the benchtop wherever you want to. These benchtops can be used in kitchens or any place where you use the surface quite often.
The DIY guide for dummies for making concrete benchtops is easy and can be easily followed at home. You can also add whatever personal touches you want to add to the benchtop to make it your own.